In terms of home improvement, many people feel that it is necessary to paint the house from the back to the front and forget it.
But every building structure is much more than walls and roofs. There are numerous systems that hold the capacity of the building.
Here is some of the systems that should be on the checklist
1) Structural system:
This includes the emotionally supportive network of the entire building to be the specific establishment, segments, shafts, slabs (in R.C.C structure). The most commonly used auxiliary systems are R.C.C. Various writes
Work in steel and wood.
When renovating a building, special attention must be given to the basic, emotionally supportive network. Chunks should be tested for airtightness. Segments and waves that are presented to the outside
Air must be checked for damage. R.C.C Primary persons are constantly secured with mortar. This mortar must be undamaged.
Should it come to the appearance of steel structures, must be connected against rust treatment wherever necessary.
If there is an occurrence of a wood structure that is termite-damaging, treatment must be fundamental wherever it is.
2) Plumbing system:
All piping that drains water into and from the structure must be checked for spillage. The primary ones are conceivable shedding is on the joints, they should be handled carefully.
Taps on wash basins, in washrooms, kitchen sinks, cans, should be checked for good and smooth working conditions.
3) Drainage system:
Waste from kitchen, washrooms, toilets should have an unhindered and short way out. Any stopping of these lines can cause flooding of the chambers, which should henceforth be checked and cleaned.
4) Electrical systems:
This begins with the primary supply of power from the nearby specialists. The purpose of entering the primary supply should be checked for excessive levels of voltage that can damage electrical equipment.
All switch panels and switches in individual rooms should be checked for legal and safe work. Safety systems, such as grounding and M.C.B’s, should be checked for safe working.
5) Doors and windows
These form an important element of any structure as far as security is concerned. A legitimate work of entrances and shutters is essential. If a security alarm system has been implemented in your home, it must be up to date and in good working order.
Entrance and window blinds should be connected to ointments for gentle tasks. In cases of sliding doors and windows, rails that allow sliding should be without order.
6) Glass panes
All glass panels used for windows and entrances should be clean. Any broken or split glass should be replaced immediately.
If the building has a sky-facing window, it should be checked for air-tightness and cleanliness at this point to allow clear and unhindered daylight inside.
7) Flooring materials
Usually, tiles are used for the deck. All tiles should be checked for splits and especially for leveling.
In any domestic floor space has a characteristic tendency to dispense with the obstruction of water, if such a circumstance arises. The tiled floor must be checked at the joints. Any cracks in the joints must be checked with the suitable retaining material.
In the case of a wooden floor surface, care must be taken to ensure that the deck remains without termite – also make sure you have the best possible wood glue you could buy.
8) Wall plaster and wall paint.
Each outer divider must be tested externally for a suitable layer of mortar. Mortar keeps the water in the structure from leaking. If the external mortar is damaged, rainwater will leak inside and cause splashing of partitions.
Each inner divider must be checked for scratches of the paint. See this list of paint sprayers by Handyman’s Garage.
8) Furniture and room accessories.
All furniture must be without termite and strong at the joints. A layer of good quality wood can breathe life into the furniture.
Other carpentry work includes entrance and window screens, entrance windows and window outlines.